Beckhoff CX9000 Bedienungsanleitung PDF herunterladen (Seite 25)

Product overview

Embedded PC 23

Force TwinCAT in "Config Mode":

For some cases (e.g. errors in boot project) it is necessary to start TwinCAT in Config mode. So the boot project can

be corrected or other settings can be (re)setted.

1. Set dip switch 4 to ON (move switch 4 up).

2. Connect CX-System to power and boot system.

3. Make changes to the PLC

4. power down the system. Set dip switch 4 back to OFF (switch 4 down) and close cover.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 60 61

Keine Kommentare

Beckhoff CX9000 Bedienungsanleitung Seite 25