Beckhoff C5101 Bedienungsanleitung PDF herunterladen (Seite 14)

Installation Instructions

Installation of the PC in the control cabinet

The C5101 Industrial PC is designed for rack mounting in machine and

plant engineering applications.

The ambient conditions specified for operation must be observed (see

chapter Technical data).

Preparation of the control

cabinet

Four holes for the fixing bolts have to be provided in the control cabinet

according to the dimensions of the PC (see chapter Assembly dimensions).

Circulation of air

Note

When the unit is installed in an enclosure, adequate space for ventilation

and for opening the PC must be provided.

The clearance above and below the housing must be at least 5 cm in

order to ensure adequate ventilation of the PC.

Avoid extreme environmental conditions

Attention

Extreme environmental conditions should be avoided as far as possible.

Protect the PC from dust, moisture and heat.

The ventilation slots of the PC must not be covered.

12 C5101

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Keine Kommentare

Beckhoff C5101 Bedienungsanleitung Seite 14